UGP Variant Pipeline 0.0.2

From Utah Genome Project Wiki
Jump to navigation Jump to search

Utah Genome Project

Variant Calling Pipeline Version 0.0.2

Sept. 2013

Data Source

Data sets used for the variant calling pipeline come from the Broad GSA (GATK) group as the 'GATK resource bundle 2.5' version 2.5

wget -r ftp://gsapubftp-anonymous@ftp.broadinstitute.org/bundle/2.5/b37
  • Reference Genome (GRCh37):
    • human_g1K_v37.fasta
  • High confidence SNVs
    • 1000G_omni2.5.b37.vcf
    • hapmap_3.3.b37.vcf
  • dbSNP
    • dbsnp_137.b37.vcf.gz
  • Known indels
    • Mills_and_1000G_gold_standard.indels.b37.vcf.gz
    • 1000G_phase1.indels.b37.vcf

Sequencing

This pipeline is designed for 100 bp Illumina HiSeq PE exome or WGS sequence data with Sanger/Illumina 1.9 quality encoding.

Validate File Integrity with md5sum

An md5sum signature should be provided for each FastQ file by the sequencing center. After the file has been downloaded, locally check the md5sum to be sure that no data corruption occurred during the file transfer.

md5sum file.fastq > file_local.md5
diff file_local.md5 file_provided.md5

If the md5sum signature differs from that provided for the file:

  • Check to be sure you have the correct file.
  • Check if the md5sum was calculated on that compressed or uncompressed file by the provider and be sure to do the same with the local copy.
  • Try the download again.
  • Contact the sequence provider.

FastQ File Analyses

fastqc Sample1_L1_R1.txt

From the fastqc_data.txt file we check the following values:

  • Encoding (must be Sanger / Illumina 1.9)
  • Total Sequences (Need to develop a acceptable range)
  • Filtered Sequences (Should be 0 or at least very low)
  • Sequence length (must be ~ 100 bp)
  • %GC (should be 45 < x < 55)
  • Total Duplicate Percentage (This value may not be valuable - an acceptable range has not been determined).

Alignment

Align reads to the genome with bwa.

Index the reference sequence if this has not already been done

bwa index -a bwtsw human_g1K_v37.fasta

The 'bwa aln' program will find the reference coordinates of the input reads (independent of their mate-pair). The following parameters are those used by the 1KG project for aligning Illumina data.

bwa aln -q 15 human_g1K_v37.fasta file.fastq > Sample1_L1_R1.sai # One lane of reads first in pair
bwa aln -q 15 human_g1K_v37.fasta file.fastq > Sample1_L1_R2.sai # One lane of reads second in pair

The 'bwa sampe'. For paired-end reads, the maximum insert size is taken to be 3 times the expected insert size.

bwa sampe -P human_g1K_v37.fasta Sample1_L1_R1.sai Sample1_L1_R1.sai Sample1_L1_R1.fastq Sample1_L1_R2.fastq | samtools view -bt human_g1K_v37.fasta.fai -o Sample1_L1 -

This will switch to bwa mem soon.

bwa mem human_g1K_v37.fasta Sample1_L1_R1.fq Sample1_L1_R2.fq | samtools view -bt human_g1K_v37.fasta.fai -o Sample1_L1 -

Bwa Command Line Options:

  • -n NUM max #diff (int) or missing prob under 0.02 err rate (float) [0.04]
  • -o INT maximum number or fraction of gap opens [1]
  • -e INT maximum number of gap extensions, -1 for disabling long gaps [-1]
  • -i INT do not put an indel within INT bp towards the ends [5]
  • -d INT maximum occurrences for extending a long deletion [10]
  • -l INT seed length [32]
  • -k INT maximum differences in the seed [2]
  • -m INT maximum entries in the queue [2000000]
  • -t INT number of threads [1]
  • -M INT mismatch penalty [3]
  • -O INT gap open penalty [11]
  • -E INT gap extension penalty [4]
  • -R INT stop searching when there are >INT equally best hits [30]
  • -q INT quality threshold for read trimming down to 35bp [0]
  • -c input sequences are in the color space
  • -L log-scaled gap penalty for long deletions
  • -N non-iterative mode: search for all n-difference hits (slooow)
  • -f FILE file to write output to instead of stdout

The AddOrReplaceReadGroups tool will add the correct readgroup ID to the BAM files

java -Xmx4g -jar picard-tools/AddOrReplaceReadGroups.jar \
   INPUT=Sample1_L1.bam                                             \
   OUTPUT=Sample1_L1.rg.bam                                         \
   CREATE_INDEX=TRUE                                                \
   VALIDATION_STRINGENCY=LENIENT                                    \
   SORT_ORDER=coordinate                                            \
   RGID=9958X1                                                      \
   RGLB=9958X1                                                      \
   RGPL=illumina                                                    \
   RGPU=1                                                           \
   TMP_DIR=/big/drive                                               \
   2> 9958X1_AddOrReplaceReadGroups.error

BAM File Analyses

Alignment BAM files are improved in various ways to help increase the quality and speed of subsequent variant calling steps.

Merge lane level BAMs to individual

java -Xmx4g -jar picard-tools/MergeSamFiles.jar \
    INPUT=Sample1_L1.rg.bam                     \
    INPUT=Sample1_L2.rg.bam                     \                                                                                                 
    OUTPUT=Sample1.bam                          \
    CREATE_INDEX=TRUE                           \
    ASSUME_SORTED=true                          \
    USE_THREADING=true                          \
    VALIDATION_STRINGENCY=SILENT                \
    TMP_DIR=/big/drive                          \
    2> MergeSameFiles.error

Mark Duplicates

Remove PCR/Optical duplicate reads

java -Xmx4g -jar MarkDuplicates.jar    \
   INPUT=Sample1.bam                   \
   OUTPUT=Sample1.dedup.bam            \
   METRICS_FILE=lane1_dup_metrics.txt  \
   ASSUME_SORTED=true                  \
   USE_THREADING=true                  \
   VALIDATION_STRINGENCY=SILENT        \
   TMP_DIR=/big/drive                  \
   2> MarkDuplicates.error

Develop range for duplicate levels here

Local Realignment of Indels

java -Xmx4g -jar GenomeAnalysisTK.jar                  \
   -I All_BAMs.list                                    \
   -o Realign_Intervals.txt                            \
   -T RealignerTargetCreator                           \
   -R human_g1K_v37.fasta                              \
   -known Mills_and_1000G_gold_standard.indels.b37.vcf \
   -known 1000G_phase1.indels.b37.vcf                  \
   -nt 24                                              \
   2> RealignerTargetCreator.error
java -Xmx4g -jar GenomeAnalysisTK.jar                  \
   -T IndelRealigner                                   \
   -I Sample1.dedup.bam                                \
   -o Sample1.realign.bam                              \
   -R human_g1K_v37.fasta                              \
   -targetIntervals Realign_Intervals.txt              \
   -known Mills_and_1000G_gold_standard.indels.b37.vcf \
   2> IndelRealigner.error

Base Quality Score Recalibration

java -Xmx4g -jar GenomeAnalysisTK.jar \
  -T PrintReads                       \
  -I Sample1.realign.bam              \
  -o Sample1.recal.bam                \
  -R human_g1K_v37.fasta              \
  -BQSR recalibration_report.grp      \


BAM Quality Control

CollectAlignmentSummaryMetrics

java -Xmx4g -jar /tools/picard-tools-1.32/CollectAlignmentSummaryMetrics.jar \
   I=/output/filename.b37_1kg.sorted.bam                                      \
   O=/output/filename.b37_1kg.AlignmentSummaryMetrics                         \
   R=human_g1K_v37.fasta                                                     \
   VALIDATION_STRINGENCY=LENIENT                                             \
   TMP_DIR=/big/drive

CollectGcBiasMetrics

java -Xmx4g -jar /tools/picard-tools-1.32/CollectGcBiasMetrics.jar \
   R=human_g1K_v37.fasta                                           \
   I=/output/filename.b37_1kg.sorted.bam                            \
   O=/output/filename.b37_1kg.GcBiasMetrics                         \
   CHART=/output/filename.b37_1kg.GcBiasMetrics.pdf                 \
   VALIDATION_STRINGENCY=LENIENT                                   \
   TMP_DIR=/big/drive

CollectInsertSizeMetrics

java -Xmx4g -jar /tools/picard-tools-1.32/CollectInsertSizeMetrics.jar \
   I=/output/filename.b37_1kg.sorted.bam                                \
   O=/output/filename.b37_1kg.CollectInsertSizeMetrics                  \
   H=/output/filename.b37_1kg.CollectInsertSizeMetrics.pdf              \
   VALIDATION_STRINGENCY=LENIENT                                       \
   TMP_DIR=/big/drive

MeanQualityByCycle

java -Xmx4g -jar /tools/picard-tools-1.32/MeanQualityByCycle.jar \
   I=/output/filename.b37_1kg.sorted.bam                          \
   O=/output/filename.b37_1kg.MeanQualityByCycle                  \
   CHART=/output/filename.b37_1kg.MeanQualityByCycle.pdf          \
   VALIDATION_STRINGENCY=LENIENT                                 \
   TMP_DIR=/big/drive

QualityScoreDistribution

java -Xmx4g -jar /tools/picard-tools-1.32/QualityScoreDistribution.jar  \
   I=/output/filename.b37_1kg.sorted.bam                                 \
   O=/output/filename.b37_1kg.[wiki:QualityScoreDistribution]            \
   CHART=/output/filename.b37_1kg.[wiki:QualityScoreDistribution].pdf    \
   VALIDATION_STRINGENCY=LENIENT                                        \
   TMP_DIR=/big/drive

BamIndexStats

java -Xmx4g -jar /tools/picard-tools-1.32/BamIndexStats.jar \
   INPUT=/output/filename.b37_1kg.sorted.bam                 \
   VALIDATION_STRINGENCY=LENIENT                            \
   TMP_DIR=/big/drive

CalculateHsMetricsWholeGenome

java -Xmx4g -jar /tools/picard-tools-1.32/CalculateHsMetricsWholeGenome.jar \
   INPUT=/output/filename.b37_1kg.sorted.bam                                 \
   OUTPUT=/output/filename.b37_1kg.HsMetrics                                 \
   BAIT_INTERVALS=/resources//hg19/intervals/GoNL.interval_list             \
   TARGET_INTERVALS=/resources//hg19/intervals/GoNL.interval_list           \
   VALIDATION_STRINGENCY=LENIENT                                            \
   TMP_DIR=/big/drive

Reduce Reads

java -Xmx4g -jar GenomeAnalysisTK.jar \
  -T ReduceReads                      \
  -I Sample1.recal.bam                \
  -o Sample1.reduced.bam              \
  -R human_g1K_v37.fasta              \
  2> ReduceReads.error

Variant Calling

UnifiedGenotyper

java -Xmx4g -jar GenomeAnalysisTK.jar \
  -T UnifiedGenotyper                  \
  -I Sample1.reduced.bam              \
  -I Sample2.reduced.bam              \
  -I Background1.reduced.bam          \
  -I Background2.reduced.bam          \
  -o Sample1.raw.vcf                  \
  -R human_g1K_v37.fasta              \
  --dbsnp dbSNP.vcf                    \
  -dcov 250                           \
  -L TruSeq_exome_regions.bed         \
  2> UnifiedGenotyper.error

VariantRecalibrator

java -Xmx4g -jar GenomeAnalysisTK.jar \
  -T VariantRecalibrator              \
  -R human_g1K_v37.fasta              \
  -input Sample1.raw.vcf              \
  -resource:hapmap,known=false,training=true,truth=true,prior=15.0 hapmap_3.3.b37.vcf          \
  -resource:omni,known=false,training=true,truth=true,prior=12.0 1000G_omni2.5.b37.vcf        \
  -resource:dbsnp,known=true,training=false,truth=false,prior=6.0 dbsnp_137.b37.vcf            \
  -an QD -an HaplotypeScore -an MQRankSum -an ReadPosRankSum -an FS -an MQ -an InbreedingCoeff \
  -mode SNP                           \
  -recalFile Sample1.recal            \
  -tranchesFile Sample1.tranches      \
  -rscriptFile Sample1.plots.R        \
  2> VariantRecalibrator.error

ApplyRecalibration

java -Xmx4g -jar GenomeAnalysisTK.jar \
  -T ApplyRecalibration               \
  -input Sample1.raw.vcf              \
  -o Sample1.vqsr.vcf                 \
  -R human_g1K_v37.fasta              \
  --ts_filter_level 99.0                \
  -tranchesFile Sample1.tranches      \
  -recalFile Sample1.recal            \
  -mode SNP                           \
  2> ApplyRecalibration.error

Variant File QC

Quality Metrics on variants

  • Ti/Tv Ratio (2.1 for WGS ~2.8 for exome)
  • HapMap concordance
  • SNV/Indel Counts
  • Rare variant enrichment