Difference between revisions of "Repeat Library Construction-Advanced"

From MAKER Wiki
Jump to navigation Jump to search
 
(38 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
This page describes an advanced method of repetitive element identification and classification. A basic understanding of repetitive elements is assumed. With this method, MITEs (miniature inverted transposable elements) and LTR (Long terminal repeat) elements, are first searched with structural approaches (MITE-hunter and LTRharvest). Numerically, MITEs represent the most abundant transposable elements while LTR elements occupy most genomic mass in plants. The structural approaches are followed by a de novo approach where most repetitive sequences are collected. Basic instructions for generating a species specific repeat library suitable for repeat masking prior to protein coding gene annotation with MAKER can be found here [[Repeat Library Construction--Basic]].
 
This page describes an advanced method of repetitive element identification and classification. A basic understanding of repetitive elements is assumed. With this method, MITEs (miniature inverted transposable elements) and LTR (Long terminal repeat) elements, are first searched with structural approaches (MITE-hunter and LTRharvest). Numerically, MITEs represent the most abundant transposable elements while LTR elements occupy most genomic mass in plants. The structural approaches are followed by a de novo approach where most repetitive sequences are collected. Basic instructions for generating a species specific repeat library suitable for repeat masking prior to protein coding gene annotation with MAKER can be found here [[Repeat Library Construction--Basic]].
  
''Content contributed by [http://www.hrt.msu.edu/ning-jiang/ Ning Jiang], Megan Bowman, and [https://plantbiology.natsci.msu.edu/directory/kevin-childs/ Kevin Childs].''
+
''Content contributed by [http://www.hrt.msu.edu/ning-jiang/ Ning Jiang], [http://bioinformaticsandbiostatisticscore.vai.org/team/ Megan Bowman], and [https://plantbiology.natsci.msu.edu/directory/kevin-childs/ Kevin Childs].''
  
 
A combination of structural-based and homology-based approach is used to maximize the opportunity for repeat collection.  
 
A combination of structural-based and homology-based approach is used to maximize the opportunity for repeat collection.  
  
 
This protocol requires [http://www.bioperl.org/  BioPerl], [http://www.drive5.com/muscle/ MUSCLE], [http://www.repeatmasker.org/ RepeatMasker], [http://hmmer.janelia.org/ Hmmer] and [ftp://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/ NCBI-BLAST]. Please download the programs and modify your PATH wherever relevant.  
 
This protocol requires [http://www.bioperl.org/  BioPerl], [http://www.drive5.com/muscle/ MUSCLE], [http://www.repeatmasker.org/ RepeatMasker], [http://hmmer.janelia.org/ Hmmer] and [ftp://ftp.ncbi.nlm.nih.gov/blast/executables/blast+/ NCBI-BLAST]. Please download the programs and modify your PATH wherever relevant.  
 
This page is in update.
 
  
 
== 1. MITEs (miniature inverted repeat transposable elements) ==
 
== 1. MITEs (miniature inverted repeat transposable elements) ==
Line 18: Line 16:
  
 
*In the plant genomes characterized so far, LTR retrotransposons represent the largest genomic mass among all repeats. As a result, it is very important to collect this type of element with high confidence.
 
*In the plant genomes characterized so far, LTR retrotransposons represent the largest genomic mass among all repeats. As a result, it is very important to collect this type of element with high confidence.
*Here, the elements are collected using [http://www.genometools.org/tools/gt_ltrharvest.html LTRharvest] and filtered by [http://www.genometools.org/tools/gt_ltrdigest.html LTRdigest] and other custom programs. Both LTRharvest and LTRdigest are in a package called GenomeTools.
+
*Here, the elements are collected using [http://www.genometools.org/tools/gt_ltrharvest.html LTRharvest] and filtered by [http://www.genometools.org/tools/gt_ltrdigest.html LTRdigest] and other custom programs. Both LTRharvest and LTRdigest are in a package called [https://www.computer.org/csdl/trans/tb/2013/03/ttb2013030645-abs.html GenomeTools].
  
 
A fully automated package for building a library for LTR elements is expected to be available with next update.  
 
A fully automated package for building a library for LTR elements is expected to be available with next update.  
Line 33: Line 31:
 
Commands:
 
Commands:
 
  DIR1/gt suffixerator -db seqfile -indexname seqfileindex -tis -suf -lcp -des -ssp –dna
 
  DIR1/gt suffixerator -db seqfile -indexname seqfileindex -tis -suf -lcp -des -ssp –dna
  DIR1/gt ltrharvest -index seqfileindex -out seqfile.out99 -outinner seqfile.outinner99 -gff3 seqfile.gff99 -minlenltr 100 -maxlenltr 6000 -mindistltr 1500 -maxdistltr 25000 -mintsd 5 -maxtsd 5 -motif tgca -similar 99 -vic 10  > seqfile.result99
+
 
 +
  DIR1/gt ltrharvest -index seqfileindex -out seqfile.out99 -outinner seqfile.outinner99 -gff3 seqfile.gff99 -minlenltr 100 \
 +
-maxlenltr 6000 -mindistltr 1500 -maxdistltr 25000 -mintsd 5 -maxtsd 5 -motif tgca -similar 99 -vic 10  > seqfile.result99
 +
 
 +
Please note all the content in this command should be in one row although it appears in two rows here. Please leave out the "\" at the end of first row if you copy it. This applies to all the long commands below.
  
 
DIR1= path where gt is located
 
DIR1= path where gt is located
Line 51: Line 53:
 
'''''2.1.2. Using LTRdigest to find elements with PPT (poly purine tract) or PBS (primer binding site)'''''
 
'''''2.1.2. Using LTRdigest to find elements with PPT (poly purine tract) or PBS (primer binding site)'''''
  
 +
Commands:
 
  DIR1/gt gff3 -sort seqfile.gff99 > seqfile.gff99.sort
 
  DIR1/gt gff3 -sort seqfile.gff99 > seqfile.gff99.sort
 +
 
  DIR1/gt ltrdigest -trnas ~/bin/LTR/eukaryotic-tRNAs.fa seqfile.gff99.sort seqfileindex > seqfile.gff99.dgt
 
  DIR1/gt ltrdigest -trnas ~/bin/LTR/eukaryotic-tRNAs.fa seqfile.gff99.sort seqfileindex > seqfile.gff99.dgt
 
The “eukaryotic-tRNAs.fa” can be downloaded from [http://gtrnadb.ucsc.edu/ Genomic tRNA database].
 
The “eukaryotic-tRNAs.fa” can be downloaded from [http://gtrnadb.ucsc.edu/ Genomic tRNA database].
Line 85: Line 89:
  
 
'''''2.1.3. Further filtering of the candidate elements'''''
 
'''''2.1.3. Further filtering of the candidate elements'''''
 
  
 
Even after the above procedures, considerable amounts of false positive elements are still detected. The three most important sources of false positives are:
 
Even after the above procedures, considerable amounts of false positive elements are still detected. The three most important sources of false positives are:
Line 91: Line 94:
 
*Local gene clusters derived from recent gene duplications
 
*Local gene clusters derived from recent gene duplications
 
*Two other transposable elements located in adjacent regions.
 
*Two other transposable elements located in adjacent regions.
A common feature of these sequences is that the alignment between the two “LTRs” often extends beyond the boundary of “LTR”.  
+
A common feature of these sequences is that the alignment between the two “LTRs” often extends beyond the boundary of “LTR”. So we retrieve the flanking sequences of the two LTRs. If the flank sequences are also alignable, the candidate element will be excluded.
  
 
The CRL_Step2.pl script removes element sequences containing significant sequencing gaps (more than 50 Ns), then 50bp flanking sequences on both sides of the remaining LTRs are retrieved.  
 
The CRL_Step2.pl script removes element sequences containing significant sequencing gaps (more than 50 Ns), then 50bp flanking sequences on both sides of the remaining LTRs are retrieved.  
Line 97: Line 100:
 
Command:
 
Command:
  
  perl DIR_CRL/CRL_Step2.pl --step1 <path to CRL_Step1_Passed_Elements.txt > --repeatfile <path to seqfile.out file> --resultfile <path to seqfile.result file> --sequencefile <path to seqfile> --removed_repeats  <CRL_Step2_Passed_Elements.fasta>
+
  perl DIR_CRL/CRL_Step2.pl --step1 <path to CRL_Step1_Passed_Elements.txt > --repeatfile <path to seqfile.out file> \
 +
--resultfile <path to seqfile.result file> --sequencefile <path to seqfile> --removed_repeats  <CRL_Step2_Passed_Elements.fasta>
  
 
The “seqfile.out” and “seqfile.result” are from 2.1.1. For example, seqfile.out99 and seqfile.result99.
 
The “seqfile.out” and “seqfile.result” are from 2.1.1. For example, seqfile.out99 and seqfile.result99.
Line 103: Line 107:
 
Example:  
 
Example:  
  
  perl DIR_CRL/CRL_Step2.pl --step1 CRL_Step1_Passed_Elements.txt  --repeatfile seqfile.out99 --resultfile seqfile.result99  --sequencefile seqfile --removed_repeats  CRL_Step2_Passed_Elements.fasta
+
  perl DIR_CRL/CRL_Step2.pl --step1 CRL_Step1_Passed_Elements.txt  --repeatfile seqfile.out99 --resultfile seqfile.result99 \
 +
  --sequencefile seqfile --removed_repeats  CRL_Step2_Passed_Elements.fasta
  
Outputs:   CRL_Step2_Passed_Elements.fasta
+
Outputs:
  Repeat_*.fasta files
+
 
 +
CRL_Step2_Passed_Elements.fasta
 +
 
 +
Repeat_*.fasta files
 
   
 
   
 
The CRL_Step2_Passed_Elements.fasta file is a FASTA file containing the element sequences without significant sequencing gaps. The Repeat_*.fasta files are small sequence files containing the 50bp flanking upstream or downstream sequence.  
 
The CRL_Step2_Passed_Elements.fasta file is a FASTA file containing the element sequences without significant sequencing gaps. The Repeat_*.fasta files are small sequence files containing the 50bp flanking upstream or downstream sequence.  
Line 127: Line 135:
 
  mv  Repeat_*.fasta  fasta_files
 
  mv  Repeat_*.fasta  fasta_files
 
  mv  CRL_Step2_Passed_Elements.fasta  fasta_files
 
  mv  CRL_Step2_Passed_Elements.fasta  fasta_files
  cd   fasta_files
+
  cd fasta_files
  
 
 
Next, the CRL_Step3.pl script aligns the Repeat_*.fasta files with default parameters.
 
Next, the CRL_Step3.pl script aligns the Repeat_*.fasta files with default parameters.
 
Specifically, the upstream sequence of 5’ LTR was aligned with that of 3’ LTR of each candidate. So were the downstream sequences. The resulting output (flankingseqfile.afa) of MUSCLE contains the two sequences in fasta format where gaps are indicated by “-”. Comparison of each corresponding position of the two sequences would reveal, among all positions of the two sequences, the number of positions associated with identical nucleotides, different nucleotide, and indels. Based on the above comparison, sequence identity of the two sequences was calculated, which equals number of identical positions divided by alignable positions. Alignable positions were derived from total positions minus gaps or indels. If the flanking sequences on either side is alignable (25 identical bps, or half of the total nucleotides, with at least 60% identity excluding gaps), the element is excluded.
 
Specifically, the upstream sequence of 5’ LTR was aligned with that of 3’ LTR of each candidate. So were the downstream sequences. The resulting output (flankingseqfile.afa) of MUSCLE contains the two sequences in fasta format where gaps are indicated by “-”. Comparison of each corresponding position of the two sequences would reveal, among all positions of the two sequences, the number of positions associated with identical nucleotides, different nucleotide, and indels. Based on the above comparison, sequence identity of the two sequences was calculated, which equals number of identical positions divided by alignable positions. Alignable positions were derived from total positions minus gaps or indels. If the flanking sequences on either side is alignable (25 identical bps, or half of the total nucleotides, with at least 60% identity excluding gaps), the element is excluded.
Line 135: Line 142:
 
Here is a sample output from flankingseqfile.afa:
 
Here is a sample output from flankingseqfile.afa:
 
For simplicity, the alignment is short but the principle remains the same.
 
For simplicity, the alignment is short but the principle remains the same.
(example)
 
  
>sequpstrean5LTR  
+
>sequpstrean5LTR
 +
AGCACGAGAAAACAA----
 +
>sequpstrean3LTR
 +
----AGTGAAAACAAAAGG
  
AGCACGAGAAAACAA
+
With this example, there is a total 15 nt in each sequence. The total number of alignment position is 19 (11 alignable positions with 8 nt gaps). Among the 11 alignable positions, two nucleotides are different and 9 are identical. So the identity is 9/11 = 82% which is > 60%. Since more than half of the nucleotides are identical and the identity is > 60%, the two sequences are considered alignable and this element is considered a false positive.
 
 
>sequpstrean3LTR
 
 
AGTGAAAACAAAAGG
 
 
 
With this example, there is a total 15 nt in each sequence. The total number of alignment position is 19 (11 alignable positions with 8 nt gaps). Among the 11 alignable positions, two nucleotides are different and 9 are identical. So the identity is 9/11 = 82% > 60% Since more than half of the nucleotides are identical and the identity is > 60%, the two sequences are considered alignable and this element is considered a false positive.
 
  
 
Note: the pidentity and seq_c parameters must be integers.  
 
Note: the pidentity and seq_c parameters must be integers.  
Line 152: Line 155:
  
 
Command:
 
Command:
  perl DIR_CRL/CRL_Step3.pl --directory <DIR/fasta_files> --step2 <CRL_Step2_Passed Elements file> --pidentity <percent identity> --seq_c <number of identical nucleotides>
+
  perl DIR_CRL/CRL_Step3.pl --directory <DIR/fasta_files> --step2 <CRL_Step2_Passed Elements file> --pidentity <percent identity> \
 +
--seq_c <number of identical nucleotides>
  
 
Example:
 
Example:
  
  perl DIR_CRL/CRL_Step3.pl --directory  /home/jiang/LTR/fasta_files --step2 CRL_Step2_Passed_Elements.fasta --pidentity 60 --seq_c 25  
+
  perl DIR_CRL/CRL_Step3.pl --directory  /home/jiang/LTR/fasta_files --step2 CRL_Step2_Passed_Elements.fasta --pidentity 60 \
 +
--seq_c 25  
  
 
Output: CRL_Step3_Passed_Elements.fasta
 
Output: CRL_Step3_Passed_Elements.fasta
Line 172: Line 177:
 
*Retrotranposons are frequently nested with each other or inserted by other elements. If left unidentified, it will cause misclassification and other complications. To detect those elements, LTR sequences from candidate elements retained after steps in 2.1.3 are used to mask the putative internal regions. If LTR sequences are detected in the internal regions, it is considered as elements nested with other insertions. '''******'''
 
*Retrotranposons are frequently nested with each other or inserted by other elements. If left unidentified, it will cause misclassification and other complications. To detect those elements, LTR sequences from candidate elements retained after steps in 2.1.3 are used to mask the putative internal regions. If LTR sequences are detected in the internal regions, it is considered as elements nested with other insertions. '''******'''
 
*If internal regions of elements match sequences in MITE.lib (see 1.), they are also considered as elements with nested insertions. '''******'''
 
*If internal regions of elements match sequences in MITE.lib (see 1.), they are also considered as elements with nested insertions. '''******'''
*The internal regions of elements are also used to search against a transposase database of which LTR retrotransposon-related proteins are excluded. If the internal sequence has significant matches with any non-LTR transposase, it is considered as an element containing nested insertions. '''******'''
+
*The internal regions of elements are also used to search against a transposase database of DNA transposons. If the internal sequence has significant matches with any DNA transposase, it is considered as an element containing nested insertions. '''******'''
  
 
Command:
 
Command:
  perl DIR_CRL/ltr_library.pl --resultfile <seqfile.result file > --step3 <CRL_Step3_Passed_Elements.fasta> --sequencefile <seqfile>
+
  perl DIR_CRL/ltr_library.pl --resultfile <seqfile.result file> --step3 <CRL_Step3_Passed_Elements.fasta> --sequencefile <seqfile>
  
 
Example:  
 
Example:  
Line 201: Line 206:
 
Output: seqfile.outinner99.masked
 
Output: seqfile.outinner99.masked
  
The seqfile.outinner99.masked file contains the seqfile.outinner99 file with sequences match MITEs or LTRs masked with Ns.  
+
The seqfile.outinner99.masked file contains the seqfile.outinner99 file with sequences that match MITEs or LTRs masked with Ns.  
  
 
Elements with nested insertion will be removed.
 
Elements with nested insertion will be removed.
Line 211: Line 216:
 
Example:  
 
Example:  
  
  perl DIR_CRL/cleanRM.pl  seqfile.outinner99.out  seqfile.outinner99.masked  >   seqfile.outinner99.unmasked
+
  perl DIR_CRL/cleanRM.pl  seqfile.outinner99.out  seqfile.outinner99.masked  > seqfile.outinner99.unmasked
  
 
Output: seqfile.outinner99.unmasked
 
Output: seqfile.outinner99.unmasked
  
If the internal region of the putative candidate element is very short, it is likely to be false positives. These elements will be excluded.
+
If the internal region of the putative candidate element is very short, it is likely to be a false positive. These elements will be excluded.
  
 
Command:
 
Command:
  perl DIR_CRL/rmshortinner.pl  seqfile.outinner99.unmasked  minimum_length_inner (suggested value 50 bp) > seqfile.outinner99.clean
+
  perl DIR_CRL/rmshortinner.pl  seqfile.outinner99.unmasked  minimum_length_inner (suggested value 50bp) > seqfile.outinner99.clean
  
 
Example:
 
Example:
Line 236: Line 241:
 
DIR2 is the directory where Tpases020812DNA is located
 
DIR2 is the directory where Tpases020812DNA is located
  
  DIR_BLAST/bin/blastx  -query  seqfile.outinner99.clean -db DIR2/Tpases020812DNA  -evalue 1e-10 -num_descriptions 10 -out seqfile.outinner99.clean_blastx.out.txt
+
  DIR_BLAST/bin/blastx  -query  seqfile.outinner99.clean -db DIR2/Tpases020812DNA  -evalue 1e-10 -num_descriptions 10 \
 +
-out seqfile.outinner99.clean_blastx.out.txt
  
 
Command for processing BLASTX result:
 
Command for processing BLASTX result:
Line 252: Line 258:
 
*LTR elements are often very repetitive in the genome, and it will be computationally challenging to retain all individual elements in the repeat library. To reduce the redundancy, representative sequences (examplars) are chosen. '''******'''  
 
*LTR elements are often very repetitive in the genome, and it will be computationally challenging to retain all individual elements in the repeat library. To reduce the redundancy, representative sequences (examplars) are chosen. '''******'''  
  
The CRL_Step4.pl script formats the passed outinner sequence from last step and creates the ltr sequence file used for the all vs all BLASTN search, using NCBI-BLAST.  
+
The CRL_Step4.pl script formats the passed outinner sequence from last step and creates the LTR sequence file used for the all vs all BLASTN search, using NCBI-BLAST.  
  
  perl DIR_CRL/CRL_Step4.pl --step3 <CRL_Step3_Passed_Elements.fasta> --resultfile <seqfile.result file> --innerfile <passed_outinner_sequence.fasta > --sequencefile <seqfile>
+
  perl DIR_CRL/CRL_Step4.pl --step3 <CRL_Step3_Passed_Elements.fasta> --resultfile <seqfile.result file> \
 +
--innerfile <passed_outinner_sequence.fasta > --sequencefile <seqfile>
  
 
Example:
 
Example:
  
  perl DIR_CRL/CRL_Step4.pl –step3 CRL_Step3_Passed_Elements.fasta --resultfile seqfile.result99 --innerfile passed_outinner_sequence.fasta  --sequencefile seqfile
+
  perl DIR_CRL/CRL_Step4.pl –step3 CRL_Step3_Passed_Elements.fasta --resultfile seqfile.result99 \
 +
--innerfile passed_outinner_sequence.fasta  --sequencefile seqfile
  
Outputs: lLTRs_Seq_For_BLAST.fasta
+
Outputs:
Inner_Seq_For_BLAST.fasta
+
 +
lLTRs_Seq_For_BLAST.fasta
 +
 
 +
Inner_Seq_For_BLAST.fasta
  
 
Command for All vs. All BLASTN  
 
Command for All vs. All BLASTN  
 
For lLTR_Seq_For_BLAST.fasta  
 
For lLTR_Seq_For_BLAST.fasta  
  
  DIR_BLAST/bin/makeblastdb -in lLTRs_Seq_For_BLAST.fasta -dbtype nucl
+
  DIR_BLAST/bin/makeblastdb -in lLTRs_Seq_For_BLAST.fasta -dbtype nucl
  
  DIR_BLAST/bin/blastn -query lLTRs_Seq_For_BLAST.fasta -db lLTRs_Seq_For_BLAST.fasta -evalue 1e-10 -num_descriptions 1000 -out lLTRs_Seq_For_BLAST.fasta.out
+
  DIR_BLAST/bin/blastn -query lLTRs_Seq_For_BLAST.fasta -db lLTRs_Seq_For_BLAST.fasta -evalue 1e-10 -num_descriptions 1000 \
 +
-out lLTRs_Seq_For_BLAST.fasta.out
  
 
For Inner_Seq_For_BLAST.fasta
 
For Inner_Seq_For_BLAST.fasta
  
  DIR_BLAST/bin/makeblastdb -in  Inner_Seq_For_BLAST.fasta   -dbtype nucl
+
  DIR_BLAST/bin/makeblastdb -in  Inner_Seq_For_BLAST.fasta -dbtype nucl
  
  DIR_BLAST/bin/blastn -query Inner_Seq_For_BLAST.fasta -db Inner_Seq_For_BLAST.fasta  -evalue 1e-10 -num_descriptions 1000 -out  Inner_Seq_For_BLAST.fasta.out
+
  DIR_BLAST/bin/blastn -query Inner_Seq_For_BLAST.fasta -db Inner_Seq_For_BLAST.fasta  -evalue 1e-10 -num_descriptions 1000 \
 +
-out  Inner_Seq_For_BLAST.fasta.out
  
 
DIR_BLAST = path where NCBI BLAST program is located
 
DIR_BLAST = path where NCBI BLAST program is located
Line 289: Line 302:
  
 
Command:  
 
Command:  
  perl DIR_CRL/CRL_Step5.pl --LTR_blast <path of the LTR blast result File> --inner_blast <path of the inner blast result File> --step3 <CRL_Step3_Passed_Elements.fasta> --final <LTR99.lib> --pcoverage <percent coverage> --pidentity <percent identity>
+
  perl DIR_CRL/CRL_Step5.pl --LTR_blast <path of the LTR blast result File> --inner_blast <path of the inner blast result File> \
 +
--step3 <CRL_Step3_Passed_Elements.fasta> --final <LTR99.lib> --pcoverage <percent coverage> --pidentity <percent identity>
  
 
If not set by the user, the defaults for these scripts are set to 90% coverage and 80% identity.
 
If not set by the user, the defaults for these scripts are set to 90% coverage and 80% identity.
Line 295: Line 309:
 
Example:
 
Example:
  
  perl DIR_CRL/CRL_Step5.pl --LTR_blast lLTRs_Seq_For_BLAST.fasta.out --inner_blast Inner_Seq_For_BLAST.fasta.out  --step3 CRL_Step3_Passed_Elements.fasta --final LTR99.lib --pcoverage 90 --pidentity 80
+
  perl DIR_CRL/CRL_Step5.pl --LTR_blast lLTRs_Seq_For_BLAST.fasta.out --inner_blast Inner_Seq_For_BLAST.fasta.out \
 +
  --step3 CRL_Step3_Passed_Elements.fasta --final LTR99.lib --pcoverage 90 --pidentity 80
  
 
Outputs: LTR99.lib
 
Outputs: LTR99.lib
Line 310: Line 325:
 
You may skip the above step if you already conducted this step in 2.1.
 
You may skip the above step if you already conducted this step in 2.1.
  
  DIR1/gt ltrharvest -index seqfileindex -out seqfile.out85 -outinner seqfile.outinner85 -gff3 seqfile.gff85 -minlenltr 100 -maxlenltr 6000 -mindistltr 1500 -maxdistltr 25000 -mintsd 5 -maxtsd 5 -vic 10  > seqfile.result85
+
  DIR1/gt ltrharvest -index seqfileindex -out seqfile.out85 -outinner seqfile.outinner85 -gff3 seqfile.gff85 -minlenltr 100 \
 +
-maxlenltr 6000 -mindistltr 1500 -maxdistltr 25000 -mintsd 5 -maxtsd 5 -vic 10  > seqfile.result85
 
*Since the terminal sequence motif is not specified, only elements with terminal sequences with patterns that are previously reported are retained.
 
*Since the terminal sequence motif is not specified, only elements with terminal sequences with patterns that are previously reported are retained.
 
*Procedures described in 2.1.2 are conducted to identify elements with PPT or PBS.
 
*Procedures described in 2.1.2 are conducted to identify elements with PPT or PBS.
Line 326: Line 342:
  
 
Command:
 
Command:
  perl DIR_CRL/remove_masked_sequence.pl --masked_elements <LTR85.lib.masked> --outfile <path to final LTR library you create from LTR85.lib>
+
  perl DIR_CRL/remove_masked_sequence.pl --masked_elements <LTR85.lib.masked> \
 +
--outfile <path to final LTR library you create from LTR85.lib>
  
 
Example:
 
Example:
Line 358: Line 375:
 
  perl DIR_CRL/rmaskedpart.pl  seqfile.masked  50  >  umseqfile
 
  perl DIR_CRL/rmaskedpart.pl  seqfile.masked  50  >  umseqfile
  
“50” means in the output sequence file there are 50 bps in each row. It is feasible to set any numbers that you would like.
+
“50” means in the output sequence file that are 50 bps in each row. It is feasible to set any numbers that you would like.
  
 
The remaining sequence is then used as the input for RepeatModeler:
 
The remaining sequence is then used as the input for RepeatModeler:
Line 368: Line 385:
 
Output: consensi.fa.classified
 
Output: consensi.fa.classified
  
Please note the output files are located in the RepeatModeler folder (folder named with “RM_...”.
+
Please note the output files are located in the RepeatModeler folder (folder named with “RM_...”).
  
 
DIR_RD = path where RepeatModeler is located
 
DIR_RD = path where RepeatModeler is located
Line 374: Line 391:
 
Among the sequences generated by RepeatModeler, some are associated with identities and others are not. The script repeatmodeler_parse.pl separates elements without identities into repeatmodeler_unknowns and the others in repeatmodeler_identities.
 
Among the sequences generated by RepeatModeler, some are associated with identities and others are not. The script repeatmodeler_parse.pl separates elements without identities into repeatmodeler_unknowns and the others in repeatmodeler_identities.
  
  perl DIR_CRL/repeatmodeler_parse.pl --fastafile <consensi.fa.classified> --unknowns <repeatmodeler_unknowns.fasta> --identities  
+
  perl DIR_CRL/repeatmodeler_parse.pl --fastafile <consensi.fa.classified> --unknowns <repeatmodeler_unknowns.fasta> \
 +
--identities <repeatmodeler_identities.fasta>
  
<repeatmodeler_identities.fasta>
+
Example:
  
Example:
+
perl DIR_CRL/repeatmodeler_parse.pl --fastafile consensi.fa.classified --unknowns repeatmodeler_unknowns.fasta  \
 +
--identities repeatmodeler_identities.fasta
 +
 
 +
Outputs:  
  
perl DIR_CRL/repeatmodeler_parse.pl --fastafile consensi.fa.classified --unknowns repeatmodeler_unknowns.fasta --identities repeatmodeler_identities.fasta  
+
repeatmodeler_unknowns.fasta
 +
   
 +
repeatmodeler_identities.fasta    
  
Outputs:     repeatmodeler_unknowns.fasta
 
    repeatmodeler_identities.fasta
 
 
Sequences in repeatmodeler_unknowns are searched against a transposase database and sequences matching transposase are considered as transposons belonging to the relevant superfamily and are incorporated into repeatmodeler_identities and excluded from repeatmodeler_unknowns. Once filtering is complete using the script transposon_blast_parse.pl the libraries ModelerUnknown.lib and ModelerID.lib are created.  
 
Sequences in repeatmodeler_unknowns are searched against a transposase database and sequences matching transposase are considered as transposons belonging to the relevant superfamily and are incorporated into repeatmodeler_identities and excluded from repeatmodeler_unknowns. Once filtering is complete using the script transposon_blast_parse.pl the libraries ModelerUnknown.lib and ModelerID.lib are created.  
  
Line 390: Line 411:
 
“Tpases020812” represents the transposase protein sequence file which is located in DIR2
 
“Tpases020812” represents the transposase protein sequence file which is located in DIR2
  
  DIR_BLAST/bin/blastx -query repeatmodeler_unknowns.fasta -db DIR2/Tpases020812  -evalue 1e-10 -num_descriptions 10 -out modelerunknown_blast_results.txt
+
  DIR_BLAST/bin/blastx -query repeatmodeler_unknowns.fasta -db DIR2/Tpases020812  -evalue 1e-10 -num_descriptions 10 \
 +
-out modelerunknown_blast_results.txt
  
 
  DIR_CRL/transposon_blast_parse.pl: --blastx <blastx output file> --modelerunknown <full path of the modeler unknown file>
 
  DIR_CRL/transposon_blast_parse.pl: --blastx <blastx output file> --modelerunknown <full path of the modeler unknown file>
Line 399: Line 421:
  
  
Output: identified_elements.txt, unknown_elements.txt
+
Outputs:
 +
 
 +
identified_elements.txt
 +
 
 +
unknown_elements.txt
 
 
 
Rename/combine files from RepeatModeler using following commands:
 
Rename/combine files from RepeatModeler using following commands:
Line 409: Line 435:
 
All repeats collected so far are used to search against a plant protein database where proteins from transposons are excluded. Elements with significant hits to genes are removed, along with 50 bp upstream and downstream of the blast hit. Remaining sequence that is less than 50 bp is removed completely. Outputs from this script are elements with no significant blast hits to the protein database and the remaining sequence from elements with blast hits that is greater than 50 bp. A package ([http://www.hrt.msu.edu/uploads/535/78637/ProtExcluder1.2.tar.gz ProtExcluder] and [http://www.hrt.msu.edu/uploads/535/78637/ProtExcluder1.2Manual.docx manual]) for conducting this task is available.
 
All repeats collected so far are used to search against a plant protein database where proteins from transposons are excluded. Elements with significant hits to genes are removed, along with 50 bp upstream and downstream of the blast hit. Remaining sequence that is less than 50 bp is removed completely. Outputs from this script are elements with no significant blast hits to the protein database and the remaining sequence from elements with blast hits that is greater than 50 bp. A package ([http://www.hrt.msu.edu/uploads/535/78637/ProtExcluder1.2.tar.gz ProtExcluder] and [http://www.hrt.msu.edu/uploads/535/78637/ProtExcluder1.2Manual.docx manual]) for conducting this task is available.
  
  DIR_BLAST/bin/blastx -query ModelerUnknown.lib repeatmodeler  -db alluniRefprexp080714 -evalue 1e-10 -num_descriptions 10 -out  
+
  DIR_BLAST/bin/blastx -query ModelerUnknown.lib -db alluniRefprexp070416 -evalue 1e-10 -num_descriptions 10 \
ModelerUnknown.lib_blast_results.txt
+
-out ModelerUnknown.lib_blast_results.txt
  
 
BLAST all libraries against the protein database.
 
BLAST all libraries against the protein database.
Line 416: Line 442:
 
ProtExcluder command Example:
 
ProtExcluder command Example:
  
  ProtExcluderPath/ProtExcluder.pl   -option ModelerUnknown.lib_blast_results.txt ModelerUnknown.lib
+
  DIR_PE/ProtExcluder.pl -option ModelerUnknown.lib_blast_results.txt ModelerUnknown.lib
 +
 
 +
DIR_PE = the directory where ProtExcluder is located.
  
 
Output: ModelerUnknown.libnoProtFinal
 
Output: ModelerUnknown.libnoProtFinal
Line 438: Line 466:
 
The transposase database is composed of transposase protein sequence from RepeatMasker package (RepeatMasker-open-3-3-0), and that from [http://bmcbioinformatics.biomedcentral.com/articles/10.1186/1471-2105-12-130, Kennedy et al. 2011], in addition to transposase sequences identified in Jiang lab.
 
The transposase database is composed of transposase protein sequence from RepeatMasker package (RepeatMasker-open-3-3-0), and that from [http://bmcbioinformatics.biomedcentral.com/articles/10.1186/1471-2105-12-130, Kennedy et al. 2011], in addition to transposase sequences identified in Jiang lab.
  
Plant protein database is available [http://www.hrt.msu.edu/uploads/535/78637/alluniRefprexp080714.gz here].
+
Plant protein database is available [http://www.hrt.msu.edu/uploads/535/78637/alluniRefprexp070416.gz here].
  
 
The plant protein database contains those from swissprot plant protein (ftp://ftp.uniprot.org/pub/databases/uniprot/current_release/knowledgebase/taxonomic_divisions/uniprot_sprot_plants.dat.gz, dated Dec. 14, 2011) and those from NCBI Refseq plants (ftp://ftp.ncbi.nih.gov/refseq/release/plant/plant.*.protein.faa.gz , *=1 to 12, dated Nov. 17, 2011).   
 
The plant protein database contains those from swissprot plant protein (ftp://ftp.uniprot.org/pub/databases/uniprot/current_release/knowledgebase/taxonomic_divisions/uniprot_sprot_plants.dat.gz, dated Dec. 14, 2011) and those from NCBI Refseq plants (ftp://ftp.ncbi.nih.gov/refseq/release/plant/plant.*.protein.faa.gz , *=1 to 12, dated Nov. 17, 2011).   
 
To reduce the annotation errors in the database, the protein sequences were filtered. First, the protein sequences were searched against NCBI EST database (TBLASTN, e=10-5), only sequences with a match were retained. Second, the remaining sequences were searched against the transposase database (BLASTP e=10-5) mentioned above, sequences with matches were excluded. Finally, the rice protein sequences were compared with verified transposons (such as Pack-MULEs) in the rice genome. If the protein sequence matched a transposon perfectly and was the only perfect match in the genome, the relevant protein sequence was excluded. Although elements such as Pack-MULEs contain true gene sequences, the annotation (the protein sequence in the database) often extends to non-gene sequences such as terminal inverted repeat or sub-terminal repeat, which are not true plant proteins and would cause great complications. As a result, it is essential to exclude them.
 
To reduce the annotation errors in the database, the protein sequences were filtered. First, the protein sequences were searched against NCBI EST database (TBLASTN, e=10-5), only sequences with a match were retained. Second, the remaining sequences were searched against the transposase database (BLASTP e=10-5) mentioned above, sequences with matches were excluded. Finally, the rice protein sequences were compared with verified transposons (such as Pack-MULEs) in the rice genome. If the protein sequence matched a transposon perfectly and was the only perfect match in the genome, the relevant protein sequence was excluded. Although elements such as Pack-MULEs contain true gene sequences, the annotation (the protein sequence in the database) often extends to non-gene sequences such as terminal inverted repeat or sub-terminal repeat, which are not true plant proteins and would cause great complications. As a result, it is essential to exclude them.
 +
 +
Reference for this page:
 +
 +
Campbell, M. S., Law, M., Holt, C., Stein, J. C., Moghe, G. D., Hunagel, D. E., Lei, J., Achawanantakun, R., Jiao, D., Lawrence, C. J., Ware, D., Shiu, S-H., Childs, K. L., Sun, Y., Jiang, N, Yandell, M. 2014. MAKER-P: a tool-kit for the rapid creation, management, and quality control of plant genome annotations. Plant Physiology 164 513-524.

Latest revision as of 17:39, 5 March 2018

This page describes an advanced method of repetitive element identification and classification. A basic understanding of repetitive elements is assumed. With this method, MITEs (miniature inverted transposable elements) and LTR (Long terminal repeat) elements, are first searched with structural approaches (MITE-hunter and LTRharvest). Numerically, MITEs represent the most abundant transposable elements while LTR elements occupy most genomic mass in plants. The structural approaches are followed by a de novo approach where most repetitive sequences are collected. Basic instructions for generating a species specific repeat library suitable for repeat masking prior to protein coding gene annotation with MAKER can be found here Repeat Library Construction--Basic.

Content contributed by Ning Jiang, Megan Bowman, and Kevin Childs.

A combination of structural-based and homology-based approach is used to maximize the opportunity for repeat collection.

This protocol requires BioPerl, MUSCLE, RepeatMasker, Hmmer and NCBI-BLAST. Please download the programs and modify your PATH wherever relevant.

1. MITEs (miniature inverted repeat transposable elements)

  • MITEs are collected using MITE-Hunter with all default parameters.
  • Among the output files, “Step8_*.fa” and “Step8_singlet.fa” are combined as the putative MITE sequences. This will be named as MITE.lib.


2. LTR (long terminal repeat) retrotransposons

  • In the plant genomes characterized so far, LTR retrotransposons represent the largest genomic mass among all repeats. As a result, it is very important to collect this type of element with high confidence.
  • Here, the elements are collected using LTRharvest and filtered by LTRdigest and other custom programs. Both LTRharvest and LTRdigest are in a package called GenomeTools.

A fully automated package for building a library for LTR elements is expected to be available with next update.

2.1. Collection of relatively recent LTR retrotranposons

The rationale for initial collection of recent LTR elements is that these elements contain less nested insertions and mutations as well as recombination, thus the chance for false positives is relatively low.


2.1.1. Collection of candidate elements with LTRs that are 99% or more in similarity using LTRharvest

Note: FASTA sequence IDs (sequence names) must NOT have “_” or “.” in them for this pipeline to function properly. Please format accordingly prior to running LTR harvest.

Commands:

DIR1/gt suffixerator -db seqfile -indexname seqfileindex -tis -suf -lcp -des -ssp –dna
DIR1/gt ltrharvest -index seqfileindex -out seqfile.out99 -outinner seqfile.outinner99 -gff3 seqfile.gff99 -minlenltr 100 \
-maxlenltr 6000 -mindistltr 1500 -maxdistltr 25000 -mintsd 5 -maxtsd 5 -motif tgca -similar 99 -vic 10  > seqfile.result99

Please note all the content in this command should be in one row although it appears in two rows here. Please leave out the "\" at the end of first row if you copy it. This applies to all the long commands below.

DIR1= path where gt is located

The current protocol is developed using GenomeTools-1.5.5.

seqfile = file containing genomic sequence in fasta format. Designate the entire path of this file or ensure that it is in the current working directory.

These two commands will enable the collection of sequences with following features:

  • Two terminal repeats which are >= 99% similar, ranging from 100 bp tp 6000 bp;
  • The two terminal repeats end with “TG…CA”;
  • The size of entire element ranges from 1.5 kb to 25 kb;
  • The element must be flanked by a 5bp TSD (target site duplication).
  • The TSD is within 10 bp from the end of the element.


2.1.2. Using LTRdigest to find elements with PPT (poly purine tract) or PBS (primer binding site)

Commands:

DIR1/gt gff3 -sort seqfile.gff99 > seqfile.gff99.sort
DIR1/gt ltrdigest -trnas ~/bin/LTR/eukaryotic-tRNAs.fa seqfile.gff99.sort seqfileindex > seqfile.gff99.dgt

The “eukaryotic-tRNAs.fa” can be downloaded from Genomic tRNA database. The output “seqfile.gff99.dgt” provides the location of PPT or PBS in each element, if any. The CRL_Step1.pl script processes the output of LTRdigest so that only elements with PPT or PBS are selected. In addition, at least 50% of the PPT or PBS sequences are located in the internal regions and the distance between LTR and PPT or PBS should be no more than 20 bp. This will ensure the boundary of the LTR is correct.

DIR_CRL = path where CRL scripts and other custom scripts are located

If any script is not in executable format, use “chmod +x” to make it executable.

Make sure Bioperl is active before running CRL scripts. For any input file, if it is not in the working directory, please move it to the working directory or specify the path.

Command:

perl DIR_CRL/CRL_Step1.pl  --gff <path to seqfile.gff.dgt file>

Example:

perl  DIR_CRL/CRL_Step1.pl –-gff  seqfile.gff99.dgt

Output: CRL_Step1_Passed_Elements.txt

CRL_Step1_Passed_Elements.txt is a text file with sequence IDs:

Example:

214_200514

739_87362

96_405925

80_527347


2.1.3. Further filtering of the candidate elements

Even after the above procedures, considerable amounts of false positive elements are still detected. The three most important sources of false positives are:

  • Tandem local repeats such as centromeric repeats.
  • Local gene clusters derived from recent gene duplications
  • Two other transposable elements located in adjacent regions.

A common feature of these sequences is that the alignment between the two “LTRs” often extends beyond the boundary of “LTR”. So we retrieve the flanking sequences of the two LTRs. If the flank sequences are also alignable, the candidate element will be excluded.

The CRL_Step2.pl script removes element sequences containing significant sequencing gaps (more than 50 Ns), then 50bp flanking sequences on both sides of the remaining LTRs are retrieved.

Command:

perl DIR_CRL/CRL_Step2.pl --step1 <path to CRL_Step1_Passed_Elements.txt > --repeatfile <path to seqfile.out file>  \
--resultfile <path to seqfile.result file> --sequencefile <path to seqfile> --removed_repeats  <CRL_Step2_Passed_Elements.fasta>

The “seqfile.out” and “seqfile.result” are from 2.1.1. For example, seqfile.out99 and seqfile.result99.

Example:

perl DIR_CRL/CRL_Step2.pl --step1 CRL_Step1_Passed_Elements.txt  --repeatfile seqfile.out99 --resultfile seqfile.result99 \
--sequencefile seqfile --removed_repeats   CRL_Step2_Passed_Elements.fasta

Outputs:

CRL_Step2_Passed_Elements.fasta

Repeat_*.fasta files

The CRL_Step2_Passed_Elements.fasta file is a FASTA file containing the element sequences without significant sequencing gaps. The Repeat_*.fasta files are small sequence files containing the 50bp flanking upstream or downstream sequence.

Example:

>chr04002_1_718645_lLTR50bp_upstream_24

CCTACCACTAGCGTCAACCTCTCTTATAACTTGCACTGTGGTCGGCCATT

>chr04002_1_718645_rLTR50bp_upstream_24

CAGTCCTTCCGAATCTCGGGGTCGAGATTCCGTTTAAGGGAGGTAGGTTT

Move the Repeat_*.fasta files and CRL_Step2_Passed_Elements.fasta into a new directory called fasta_files. The CRL_Step3 script needs to be run in the fasta_files directory.

Commands:

mkdir  fasta_files
mv  Repeat_*.fasta   fasta_files
mv  CRL_Step2_Passed_Elements.fasta  fasta_files
cd  fasta_files

Next, the CRL_Step3.pl script aligns the Repeat_*.fasta files with default parameters. Specifically, the upstream sequence of 5’ LTR was aligned with that of 3’ LTR of each candidate. So were the downstream sequences. The resulting output (flankingseqfile.afa) of MUSCLE contains the two sequences in fasta format where gaps are indicated by “-”. Comparison of each corresponding position of the two sequences would reveal, among all positions of the two sequences, the number of positions associated with identical nucleotides, different nucleotide, and indels. Based on the above comparison, sequence identity of the two sequences was calculated, which equals number of identical positions divided by alignable positions. Alignable positions were derived from total positions minus gaps or indels. If the flanking sequences on either side is alignable (25 identical bps, or half of the total nucleotides, with at least 60% identity excluding gaps), the element is excluded.

Here is a sample output from flankingseqfile.afa: For simplicity, the alignment is short but the principle remains the same.

>sequpstrean5LTR
AGCACGAGAAAACAA----
>sequpstrean3LTR
----AGTGAAAACAAAAGG

With this example, there is a total 15 nt in each sequence. The total number of alignment position is 19 (11 alignable positions with 8 nt gaps). Among the 11 alignable positions, two nucleotides are different and 9 are identical. So the identity is 9/11 = 82% which is > 60%. Since more than half of the nucleotides are identical and the identity is > 60%, the two sequences are considered alignable and this element is considered a false positive.

Note: the pidentity and seq_c parameters must be integers.

Make sure MUSCLE is active before running CRL_Step3.pl.

Command:

perl DIR_CRL/CRL_Step3.pl --directory <DIR/fasta_files> --step2 <CRL_Step2_Passed Elements file> --pidentity <percent identity> \
--seq_c <number of identical nucleotides>

Example:

perl DIR_CRL/CRL_Step3.pl --directory  /home/jiang/LTR/fasta_files --step2 CRL_Step2_Passed_Elements.fasta --pidentity 60 \
--seq_c 25 

Output: CRL_Step3_Passed_Elements.fasta

The CRL_Step3_Passed_Elements.fasta file is a FASTA sequence file containing element sequences that have passed the percent identity and number of identical nucleotides thresholds. This file will be located in the fasta_files directory.

Move CRL_Step3_Passed_Elements.fasta to the parental directory before proceeding to next step.

Commands:

mv  CRL_Step3_Passed_Elements.fasta  ..
cd  ..

2.1.4. Identify elements with nested insertions

  • Retrotranposons are frequently nested with each other or inserted by other elements. If left unidentified, it will cause misclassification and other complications. To detect those elements, LTR sequences from candidate elements retained after steps in 2.1.3 are used to mask the putative internal regions. If LTR sequences are detected in the internal regions, it is considered as elements nested with other insertions. ******
  • If internal regions of elements match sequences in MITE.lib (see 1.), they are also considered as elements with nested insertions. ******
  • The internal regions of elements are also used to search against a transposase database of DNA transposons. If the internal sequence has significant matches with any DNA transposase, it is considered as an element containing nested insertions. ******

Command:

perl DIR_CRL/ltr_library.pl --resultfile <seqfile.result file> --step3 <CRL_Step3_Passed_Elements.fasta> --sequencefile <seqfile>

Example:

perl DIR_CRL/ltr_library.pl --resultfile seqfile.result99  --step3 CRL_Step3_Passed_Elements.fasta --sequencefile seqfile

Output: lLTR_Only.lib

The lLTR_Only.lib output is a FASTA file containing the sequence of the left (5'end) LTR sequence.

Combine lLTR_Only.lib and MITE.lib to form a library to mask the internal regions of putative LTR elements

Command:

cat lLTR_Only.lib  MITE.lib  > repeats_to_mask_LTR99.fasta

RepeatMasker Command:

DIR_RM1/RepeatMasker -lib repeats_to_mask_LTR99.fasta   -nolow  -dir .  seqfile.outinner99

DIR_RM1 = path where RepeatMasker is located

-dir . = will write to the current directory, please note there is space between “-dir” and “.”

-nolow = ignor simiple repeats (because in this step nested insertion is the focus)

Output: seqfile.outinner99.masked

The seqfile.outinner99.masked file contains the seqfile.outinner99 file with sequences that match MITEs or LTRs masked with Ns.

Elements with nested insertion will be removed.

Command:

perl DIR_CRL/cleanRM.pl  seqfile.outinner.out  seqfile.outinner.masked  >  seqfile.outinner.unmasked

Example:

perl DIR_CRL/cleanRM.pl  seqfile.outinner99.out  seqfile.outinner99.masked  >  seqfile.outinner99.unmasked

Output: seqfile.outinner99.unmasked

If the internal region of the putative candidate element is very short, it is likely to be a false positive. These elements will be excluded.

Command:

perl DIR_CRL/rmshortinner.pl  seqfile.outinner99.unmasked  minimum_length_inner (suggested value 50bp) > seqfile.outinner99.clean

Example:

perl DIR_CRL/rmshortinner.pl  seqfile.outinner99.unmasked  50 > seqfile.outinner99.clean

Output: seqfile.outinner99.clean

Next, use BLASTX and the script outinner_blastx_parse.pl to identify any additional outinner sequence with nested insertions of putative autonomous DNA transposons and eliminate them from subsequent steps.

Commands for BLASTX:

DIR_BLAST/bin/makeblastdb -in DIR2/Tpases020812DNA  -dbtype prot

“Tpases020812DNA” represents the DNA transposase protein sequence file

DIR2 is the directory where Tpases020812DNA is located

DIR_BLAST/bin/blastx  -query  seqfile.outinner99.clean -db DIR2/Tpases020812DNA  -evalue 1e-10 -num_descriptions 10 \
-out seqfile.outinner99.clean_blastx.out.txt

Command for processing BLASTX result:

perl  DIR_CRL/outinner_blastx_parse.pl --blastx <blastx output file> --outinner <full path of seqfile.outinner sequence>

Example:

perl  DIR_CRL/outinner_blastx_parse.pl --blastx  seqfile.outinner99.clean_blastx.out.txt  --outinner  seqfile.outinner99

Output: passed_outinner_sequence.fasta

2.1.5 Building examplars

  • LTR elements are often very repetitive in the genome, and it will be computationally challenging to retain all individual elements in the repeat library. To reduce the redundancy, representative sequences (examplars) are chosen. ******

The CRL_Step4.pl script formats the passed outinner sequence from last step and creates the LTR sequence file used for the all vs all BLASTN search, using NCBI-BLAST.

perl DIR_CRL/CRL_Step4.pl --step3 <CRL_Step3_Passed_Elements.fasta> --resultfile <seqfile.result file> \
--innerfile <passed_outinner_sequence.fasta > --sequencefile <seqfile>

Example:

perl DIR_CRL/CRL_Step4.pl –step3 CRL_Step3_Passed_Elements.fasta --resultfile seqfile.result99 \
--innerfile passed_outinner_sequence.fasta  --sequencefile seqfile

Outputs:

lLTRs_Seq_For_BLAST.fasta

Inner_Seq_For_BLAST.fasta

Command for All vs. All BLASTN For lLTR_Seq_For_BLAST.fasta

DIR_BLAST/bin/makeblastdb -in lLTRs_Seq_For_BLAST.fasta  -dbtype nucl
DIR_BLAST/bin/blastn -query lLTRs_Seq_For_BLAST.fasta -db lLTRs_Seq_For_BLAST.fasta -evalue 1e-10 -num_descriptions 1000  \
-out lLTRs_Seq_For_BLAST.fasta.out

For Inner_Seq_For_BLAST.fasta

DIR_BLAST/bin/makeblastdb -in  Inner_Seq_For_BLAST.fasta  -dbtype nucl
DIR_BLAST/bin/blastn -query Inner_Seq_For_BLAST.fasta -db Inner_Seq_For_BLAST.fasta  -evalue 1e-10 -num_descriptions 1000 \
-out  Inner_Seq_For_BLAST.fasta.out

DIR_BLAST = path where NCBI BLAST program is located

The current protocol is developed using ncbi-blast-2.4.0+

Next, the CRL_Step5.pl script processes the BLASTN results as follows:

The element with the most matches (cutoff at 80% identity in 90% of the element length) is considered as the first exemplar. Thereafter, this element and its matches are excluded from the group and a second round BLASTN search is conducted with the remainder of the elements, leading to the generation of the second exemplar. This process is repeated until all elements were excluded.

Since the internal sequences of LTRs are usually more conserved than LTR sequences, selection of exemplars are first conducted with the internal sequences of the elements without nested insertions. Thereafter the LTR sequences correspond to the exemplars of internal regions are also chosen. The sequences of LTR exemplars are then used to mask all LTR sequences of all candidate elements; those sequences that are masked (cutoff 80% identity in 90% of the sequence length) are excluded. The remainder of LTR sequences is used to generate a new pool of exemplar sequences.

All the exemplar sequences generated are combined together and called LTR99.lib.

Command:

perl DIR_CRL/CRL_Step5.pl --LTR_blast <path of the LTR blast result File> --inner_blast <path of the inner blast result File> \
--step3 <CRL_Step3_Passed_Elements.fasta> --final <LTR99.lib> --pcoverage <percent coverage> --pidentity <percent identity>

If not set by the user, the defaults for these scripts are set to 90% coverage and 80% identity.

Example:

perl DIR_CRL/CRL_Step5.pl --LTR_blast lLTRs_Seq_For_BLAST.fasta.out --inner_blast Inner_Seq_For_BLAST.fasta.out  \
--step3 CRL_Step3_Passed_Elements.fasta --final LTR99.lib --pcoverage 90 --pidentity 80

Outputs: LTR99.lib

The LTR99.lib output file is a FASTA file containing the exemplar sequences.

2.2. Collection of relatively old LTR retrotransposons

Collection of relatively old LTRs is enabled by reducing the similarity between LTRs to 85% (default value of LTRharvest) and not associated with terminal sequence motif.

Commands:

DIR1/gt suffixerator -db seqfile -indexname seqfileindex -tis -suf -lcp -des -ssp –dna

You may skip the above step if you already conducted this step in 2.1.

DIR1/gt ltrharvest -index seqfileindex -out seqfile.out85 -outinner seqfile.outinner85 -gff3 seqfile.gff85 -minlenltr 100 \
-maxlenltr 6000 -mindistltr 1500 -maxdistltr 25000 -mintsd 5 -maxtsd 5 -vic 10  > seqfile.result85
  • Since the terminal sequence motif is not specified, only elements with terminal sequences with patterns that are previously reported are retained.
  • Procedures described in 2.1.2 are conducted to identify elements with PPT or PBS.

The list of elements is processed through the procedures described in 2.1.3 to 2.1.5 using scripts CRL_Step2 to CRL_Step5 and the resulting exemplar sequences are called LTR85.lib.

Prior to this process, remove or rename all the files associated with 2.1 to avoid confusion or misuse.

Since this set of elements contain elements collected in 2.1. (LTR99.lib) or elements highly similar to them, the examplar sequences are masked by LTR99.lib and all elements that are significantly masked (cutoff at 80% identity in 90% of the element length) are excluded.

DIR_RM/RepeatMasker -lib LTR99.lib -dir . LTR85.lib

Output: LTR85.lib.masked

The removed_masked_sequence.pl script will remove the LTR99.lib sequences masked from the LTR85.lib dataset.

Command:

perl DIR_CRL/remove_masked_sequence.pl --masked_elements <LTR85.lib.masked> \
--outfile <path to final LTR library you create from LTR85.lib>

Example:

perl DIR_CRL/remove_masked_sequence.pl  --masked_elements  LTR85.lib.masked  --outfile  FinalLTR85.lib

Hereafter this library will be referred as FinalLTR85.lib

Combine LTR99.lib, FinalLTR85.lib to obtain allLTR.lib

Command:

cat LTR99.lib FinalLTR85.lib > allLTR.lib

3. Collecting repetitive sequences by RepeatModeler

The genomic sequence is masked by (allLTR.lib + MITE.lib = allMITE_LTR.lib).

Commands:

cat allLTR.lib MITE.lib > allMITE_LTR.lib
DIR_RM/RepeatMasker -lib allMITE_LTR.lib -dir . seqfile

Output: seqfile.masked

If the seqfile is very large, it would take forever to mask it. In this case, you may split it into small files (e.g. 50 Mb or smaller) to conduct RepeatMasker and combine the masked files together.

Use the following script to remove the masked elements:

perl DIR_CRL/rmaskedpart.pl  seqfile.masked  50  >  umseqfile

“50” means in the output sequence file that are 50 bps in each row. It is feasible to set any numbers that you would like.

The remaining sequence is then used as the input for RepeatModeler:

DIR_RD/BuildDatabase -name umseqfiledb -engine ncbi <path to umseqfile>
nohup DIR_RD/RepeatModeler -database umseqfiledb >& umseqfile.out 

Output: consensi.fa.classified

Please note the output files are located in the RepeatModeler folder (folder named with “RM_...”).

DIR_RD = path where RepeatModeler is located

Among the sequences generated by RepeatModeler, some are associated with identities and others are not. The script repeatmodeler_parse.pl separates elements without identities into repeatmodeler_unknowns and the others in repeatmodeler_identities.

perl DIR_CRL/repeatmodeler_parse.pl --fastafile <consensi.fa.classified> --unknowns <repeatmodeler_unknowns.fasta> \
--identities  <repeatmodeler_identities.fasta>

Example:

perl DIR_CRL/repeatmodeler_parse.pl --fastafile consensi.fa.classified --unknowns repeatmodeler_unknowns.fasta  \
--identities repeatmodeler_identities.fasta 

Outputs:

repeatmodeler_unknowns.fasta

repeatmodeler_identities.fasta

Sequences in repeatmodeler_unknowns are searched against a transposase database and sequences matching transposase are considered as transposons belonging to the relevant superfamily and are incorporated into repeatmodeler_identities and excluded from repeatmodeler_unknowns. Once filtering is complete using the script transposon_blast_parse.pl the libraries ModelerUnknown.lib and ModelerID.lib are created.

DIR_BLAST/bin/makeblastdb -in DIR2/Tpases020812  -dbtype prot

“Tpases020812” represents the transposase protein sequence file which is located in DIR2

DIR_BLAST/bin/blastx -query repeatmodeler_unknowns.fasta -db DIR2/Tpases020812  -evalue 1e-10 -num_descriptions 10 \
-out modelerunknown_blast_results.txt
DIR_CRL/transposon_blast_parse.pl: --blastx <blastx output file> --modelerunknown <full path of the modeler unknown file>

Example:

perl DIR_CRL/transposon_blast_parse.pl --blastx modelerunknown_blast_results.txt --modelerunknown repeatmodeler_unknowns.fasta


Outputs:

identified_elements.txt

unknown_elements.txt

Rename/combine files from RepeatModeler using following commands:

mv  unknown_elements.txt  ModelerUnknown.lib
cat  identified_elements.txt  repeatmodeler_identities.fasta  > ModelerID.lib

4. Exclusion of gene fragments

All repeats collected so far are used to search against a plant protein database where proteins from transposons are excluded. Elements with significant hits to genes are removed, along with 50 bp upstream and downstream of the blast hit. Remaining sequence that is less than 50 bp is removed completely. Outputs from this script are elements with no significant blast hits to the protein database and the remaining sequence from elements with blast hits that is greater than 50 bp. A package (ProtExcluder and manual) for conducting this task is available.

DIR_BLAST/bin/blastx -query ModelerUnknown.lib -db alluniRefprexp070416  -evalue 1e-10 -num_descriptions 10 \
-out ModelerUnknown.lib_blast_results.txt

BLAST all libraries against the protein database.

ProtExcluder command Example:

DIR_PE/ProtExcluder.pl  -option  ModelerUnknown.lib_blast_results.txt  ModelerUnknown.lib

DIR_PE = the directory where ProtExcluder is located.

Output: ModelerUnknown.libnoProtFinal

Please see ProtExcluder manual for detailed instruction.

Run this on each of the repeat libraries. Alternatively, you may combine all the repeat libraries and only run it once.

After exclusion of putative gene fragments, MITE.lib, allLTR.lib, and ModelerID.lib are combined together to form KnownRepeats.lib.

KnownRepeats.lib was combined with Modelerunknown.lib to form allRepeats.lib.

It is conceivable that KnownRepeats.lib does not contain all repeats (repeats numbers are underestimated); allRepeats.lib may contain sequences from novel gene families (repeat numbers are overestimated).

CRL and other custom scripts are available here.

All transposase protein database is available here.

DNA transposase protein database is available here.

The transposase database is composed of transposase protein sequence from RepeatMasker package (RepeatMasker-open-3-3-0), and that from Kennedy et al. 2011, in addition to transposase sequences identified in Jiang lab.

Plant protein database is available here.

The plant protein database contains those from swissprot plant protein (ftp://ftp.uniprot.org/pub/databases/uniprot/current_release/knowledgebase/taxonomic_divisions/uniprot_sprot_plants.dat.gz, dated Dec. 14, 2011) and those from NCBI Refseq plants (ftp://ftp.ncbi.nih.gov/refseq/release/plant/plant.*.protein.faa.gz , *=1 to 12, dated Nov. 17, 2011). To reduce the annotation errors in the database, the protein sequences were filtered. First, the protein sequences were searched against NCBI EST database (TBLASTN, e=10-5), only sequences with a match were retained. Second, the remaining sequences were searched against the transposase database (BLASTP e=10-5) mentioned above, sequences with matches were excluded. Finally, the rice protein sequences were compared with verified transposons (such as Pack-MULEs) in the rice genome. If the protein sequence matched a transposon perfectly and was the only perfect match in the genome, the relevant protein sequence was excluded. Although elements such as Pack-MULEs contain true gene sequences, the annotation (the protein sequence in the database) often extends to non-gene sequences such as terminal inverted repeat or sub-terminal repeat, which are not true plant proteins and would cause great complications. As a result, it is essential to exclude them.

Reference for this page:

Campbell, M. S., Law, M., Holt, C., Stein, J. C., Moghe, G. D., Hunagel, D. E., Lei, J., Achawanantakun, R., Jiao, D., Lawrence, C. J., Ware, D., Shiu, S-H., Childs, K. L., Sun, Y., Jiang, N, Yandell, M. 2014. MAKER-P: a tool-kit for the rapid creation, management, and quality control of plant genome annotations. Plant Physiology 164 513-524.